3-3
AC power is supplied to interior of the inlet cover. Be sure to cut off the power supply
and wait for at least 10 seconds to pull the power cable out of the outlet before
opening the cover. When performing the adjustment in a state where the cover is
opened, be fully careful about an electric shock.
Caution against electric shock
[Interior of the side cover(cover-opening state)]
[Interior of Inlet cover part (cover-opening state)]
AC power is supplied to interior of the side cover. In order to avoid an electric shock,
be sure to turn off the power supply and wait for at least 10 seconds and pull the
power cable out of the outlet before opening the cover.
It is not necessary to remove Inlet cover or Inlet base when accessing to interior of
Caution when accessing to interior of the side cover
Be sure to connect the ground wire
before turning on the power
Caution against electric shock
（Yellow/green spiral）
[UX-D/E]
[UX-B]
DOUBLE POLE/NEUTRAL FUSING.
(DOUBLE PÔLE /FUSIBLE SUR LE NEUTRE)
Power cable
Inlet cover
Main power switch
Maintenance door
Interior of the side cover
To Next Page
Loading...
Need help?
General
