● Since the ink and makeup contain organic solvents, observe the
following handling precautions.
①When handling the ink or makeup, wear protective gloves and safety goggles to
avoid direct skin contact. If the ink or makeup comes into contact with skin, wash
thoroughly with soap and warm or cold water.
②When transferring the ink or makeup to or from a bottle, exercise caution to prevent
it coming into contact with the printer or surrounding articles.
If there is any spillage, immediately wipe it clean using a cloth moistened with
makeup.
③Since the vapor pressure of the makeup is generally high, if the ambient
temperature is high such as in the summer, etc., the internal pressure will rise and
makeup could spurt out when the outside cover is removed. Therefore, when
unplugging,
● do not hold the bottle near your face
● place the can on a level surface
● open while covering the opening with a rag, etc.
● Ink and makeup must be stored as flammable liquids. Storage must
comply with local regulatory requirements. Consult the appropriate
regulatory agency for further information.
To Next Page
Loading...
Need help?
General
