3.2.2 Battery (EZJ128 board)
[Function]
- The backup battery placed for the RTC (Calendar IC) on the EZJ128 board
- 2 batteries are placed per 1 machine. The batterys works as the backup battery
for EZJ133 board and EZJ128 board respectively.
[Note at the replacement]
[Battery external view]
- Before replacing the battery, be sure to turn main power switch OFF.
- Confirm that CN8 is surely inserted or date backup cannot be performed)
- After EZJ128 board is replaced, restart IJP to adjust the date and time if the date and
time are displayed wrongly.
gain if it shows wrong date or time.
With respect to the setting
of date and time, refer to
the Instruction manual “6.2
setting the Date and
Time”.
To Next Page
Loading...
