Hitachi UX Twin Nozzle - Page 83

3-7
[EZJ128 board external view]
- Please use the Rescue software when IJ printer does start up not normally after the
board is replaced.（Refer to “2.18 Rescue software” for detail.）
Caution
！
CN6
Connector for
touch panel
CN4
Connector for LCD
harness
Connector for
EZJ133 board
CN8
Connector for battery
connection
Fixing screw
(3 locations)
NO
Fixing screw
Fixing screw
(3 locations)
Fixing screw
(3 locations)
Connector for
USB
F1
F2
IC34
F3
Connector for
EZJ 114 board
C55+
Board name/board revision
Board revision C or before: NOT available for Model UX-D (Twin-nozzle)
Board revision D onward: Available for Model UX-D (Twin-nozzle)
Serial Number