5-5
６ Lift MV9 (or MV29).
７ (1) Remove the Nozzle-IN joint from MGV, and remove MGV filter and O-ring 3.9.
Fix the new MGV filter and new O-ring 3.9.
Perform the assembly after dipping the O-ring in makeup, and confirm that the
O-ring does not jump out of the hole.
(2) Attach the head cover and the heater cover.
O-rings are inserted here. When they
are come off, dip the O-rings in
makeup and perform the assembly.
To Next Page
Loading...
