OPERATING INSTRUCTIONS FOR PROCESSING COBAS AMPLICOR™ CT/NG
SAMPLES
5B.14
ThinPrep 2000 Processor Operator’s Manual
CLOSING THE DOOR
To close the door, grasp the door tab and slide it completely to the left.
The instrument will not operate if the door is open. The door must never be opened during instru-
ment operation. If the door is opened after processing begins, the sequence will abort. The system
will wait until the door is closed before system recovery will occur.
Figure 5B-12 Door Opening and Closing
Caution:
Do not open the door during processing. Depending on where a sequence is inter-
rupted, cells may be lost or air-dried during recovery.
To Next Page
Loading...
