GENERAL INFORMATION
1-8
LUBRICATION SYSTEM SPECIFICATIONS
Unit: mm (in)
FUEL SYSTEM (PGM-FI) SPECIFICATIONS
COOLING SYSTEM SPECIFICATIONS
ITEM STANDARD SERVICE LIMIT
Engine oil capacity After draining 2.7 liter (2.9 US qt, 2.4 lmp qt) –
After oil filter change 2.8 liter (3.0 US qt, 2.5 lmp qt) –
After disassembly 3.5 liter (3.7 US qt, 3.1 lmp qt) –
Engine oil Suggested oil: –
Honda "4-stroke motorcycle oil" or
an equivalent
Oil recommendation:
API classification: SG or higher
(except oils labeled as energy con-
serving on the circular API service
label)
Viscosity: SAE 10W-30
JASO T 903 standard: MA
Oil pressure at EOP switch 496 kPa (5.1 kgf/cm
2
, 72 psi) at
6,000 min
-1
(rpm)/(80°C/176°F)
–
Oil pump Tip clearance 0.15 (0.006) 0.20 (0.008)
Body clearance 0.15 – 0.21 (0.006 – 0.008) 0.35 (0.014)
Side clearance 0.04 – 0.09 (0.002 – 0.004) 0.17 (0.007)
ITEM SPECIFICATIONS
Throttle body identification number GQ84A
Idle speed 1,300 ± 100 min
-1
(rpm)
Throttle grip freeplay 2 – 6 mm (1/16 – 1/4 in)
IAT sensor resistance (at 20°C/68°F) 1 – 4 kΩ
ECT sensor resistance (at 20°C/68°F) 2.3 – 2.6 kΩ
Fuel injector resistance (at 20°C /68°F) 11 – 13 Ω
PAIR control solenoid valve resistance (at 20°C/68°F) 23 – 27 Ω
CKP sensor peak voltage (at 20°C/68°F) 0.7 V minimum
Fuel pressure at idle 343 kPa (3.5 kgf/cm
2
, 50 psi)
Fuel pump flow (at 12 V) 189 cm
3
(6.4 US oz, 6.7 lmp oz) minimum/10 seconds
ITEM SPECIFICATIONS
Coolant capacity Radiator and engine 2.42 liter (2.56 US qt, 2.13 lmp qt)
Reserve tank 0.35 liter (0.37 US qt, 0.31 lmp qt)
Radiator cap relief pressure 108 – 137 kPa (1.1 – 1.4 kgf/cm
2
, 16 – 20 psi)
Thermostat Begin to open 80 – 84 °C (176 – 183 °F)
Fully open 95 °C (203 °F)
Valve lift 8 mm (0.3 in) minimum
Recommended antifreeze High quality ethylene glycol antifreeze containing corrosion
protection inhibitors
Standard coolant concentration 1:1 mixture with distilled water
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk
To Next Page
