COOLING SYSTEM
6-11
Refer to the wires
properly
(page 1-24).
Route the water hose properly and connect the
water hose to the filler neck.
Tighten the hose band screw securely.
Install the filler neck and tighten the bolt securely.
Connect the #4 spark plug cap securely.
Lower the fuel tank and install the front mounting
bolts (page 3-5).
Fill the system with recommended coolant and
bleed the air (page 6-7).
RADIATOR
REMOVAL
Drain the coolant (page 6-7).
Lift and support the fuel tank (page 3-5).
Release the hooks from the tabs on the radiator and
remove the radiator grill.
Disconnect the fan motor 2P (Black) connector.
WATER HOSE
SCREW
FILLER NECK
FILLER NECK
BOLT
#4 SPARK PLUG CAP
CBF600N/NA only:
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk
To Next Page
