CRANKCASE/TRANSMISSION
11-6
Place the engine upside down.
Loosen the 10 mm bolt and 6 mm bolts in a criss-
cross pattern in two to three steps.
Loosen the 8 mm bolts (main journal bolts) in a
crisscross pattern in two to three steps, then
remove the bolts and sealing washers.
Separate the lower crankcase from the upper crank-
case.
Remove the dowel pins and oil orifices.
Clean any sealant off from the crankcase mating
surface.
SHIFT FORK/SHIFT DRUM/
TRANSMISSION
REMOVAL/DISASSEMBLY
Separate the crankcase halves (page 11-5).
Remove the countershaft assembly.
10 mm BOLT
8 mm BOLTS (MAIN JOURNAL BOLTS)
6 mm BOLTS/SEALING WASHERS
6 mm BOLTS
6 mm BOLTS
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk
To Next Page
