Honda CBF600SA - Steering Stem

FRONT WHEEL/SUSPENSION/STEERING
13-33
STEERING STEM
REMOVAL
Remove the following:
– front center cowl (CBF600S/SA) (page 2-10)
– headlight case (CBF600N/NA) (page 20-7)
– handlebar (page 13-8)
– front wheel (page 13-15)
Remove the combination meter rubber.
Disconnect the ignition switch 2P (Brown) connector
and immobilizer 4P connector.
CBF600S/SA only: Remove the clamp.
Release the wire clamp and remove the main wire
harness and left handlebar switch wire.
CBF600S/SA only:
RUBBER
2P (Brown) CONNECTOR
4P CONNECTOR
CBF600S/SA shown:
CLAMP
LEFT HANDLEBAR SWITCH WIRE
MAIN WIRE HARNESS
WIRE CLAMP
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk