Honda CBF600SA - Cylinder Head Cover Assembly

CYLINDER HEAD/VALVES
8-30
In case the cam sprockets were removed, tighten
the cam sprocket bolts to the specified torque.
Turn the crankshaft clockwise one full turn (360°)
and tighten the other cam sprocket bolts.
Remove the stopper tool from the cam chain
tensioner lifter.
Install a new sealing washer and tighten the sealing
bolt.
Recheck the valve timing.
CYLINDER HEAD COVER ASSEMBLY
Install the PAIR check valve port plates into the cyl-
inder head cover.
TORQUE: 20 N·m(2.0kgf·m, 15 lbf·ft)
CAM SPROCKET BOLTS
STOPPER TOOL
BOLT
SEALING WASHER
CAM CHAIN TENSIONER LIFTER
PORT PLATES
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk