FUEL SYSTEM (PGM-FI)
5-96
ENGINE STOP RELAY
INSPECTION
Remove the rear cowl (page 2-5).
Remove the engine stop relay from the rubber
holder.
Disconnect the engine stop relay connector.
Connect the ohmmeter to the engine stop relay con-
nector terminals.
Connect a 12 V battery to the following engine stop
relay connector terminals.
There should be continuity only when the 12 V bat-
tery is connected.
If there is no continuity when the 12 V battery is
connected, replace the engine stop relay.
ENGINE STOP RELAY
CBF600S/SA
CBF600N/NA
ENGINE STOP RELAY
CONNECTION: A – B
CONNECTION: C (+) – D(–)
BATTERY
A
C
D
B
ENGINE STOP RELAY
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk
To Next Page
