Honda CBF600SA - Front Fender

FRAME/BODY PANELS/EXHAUST SYSTEM
2-6
INSTALLATION
Installation is in the reverse order of removal.
Install the rear center cowl while aligning the seat
lock cylinder tab with the seat catch tab.
Install and tighten the socket bolts securely.
Install the grab rail and socket bolts.
Tighten the mounting socket bolts to the specified
torque.
Install the bolt caps securely.
FRONT FENDER
REMOVAL/INSTALATION
Remove the front wheel (page 13-15).
Remove the front brake hose clamp bolts.
Remove the mounting bolts and front fender.
Installation is in the reverse order of removal.
Install and tighten the front fender mounting bolts
to the specified torque.
Install and tighten a new front brake hose clamp
bolts to the specified torque.
TORQUE: 27 N·m(2.8kgf·m, 20 lbf·ft)
SOCKET BOLTS
REAR CENTER
COWL
BOLT
CAPS
GRAB RAIL
SOCKET
BOLTS
CLAMP BOLTS
TORQUE: 12 N·m(1.2kgf·m, 9 lbf·ft)
FRONT FENDER
MOUNTING BOLTS
TORQUE: 12 N·m(1.2kgf·m, 9 lbf·ft)
CLAMP BOLTS
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk