Honda CBF600SA - Main Stand (Cbf600 Sa;Na)

FRAME/BODY PANELS/EXHAUST SYSTEM
2-13
MAIN STAND (CBF600SA/NA)
REMOVAL
Remove the exhaust pipe (page 2-11).
Support the motorcycle securely using the side
stand.
Unhook the return springs.
Remove the main stand pivot nut/washer.
Remove the pivot bolt/washer, then remove the
main stand.
INSTALLATION
Install the main stand.
Install the pivot bolt/washer.
Hook the return springs.
PIVOT NUT/
RETURN SPRINGS
PIVOT BOLT/WASHER
MAIN STAND
PIVOT BOLT/WASHER
MAIN STAND
RETURN SPRINGS
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk