FUEL SYSTEM (PGM-FI)
5-60
INSTALLATION
Install the fuel tank onto the frame, then install the
collars, washers pivot bolt and nut.
Hold the pivot bolt and tighten the nut to the speci-
fied torque.
Lift and support the fuel tank (page 3-5).
Connect the fuel tank stopper cable through the
stopper groove of stay.
Install and tighten the nut securely.
2P (Black) CONNECTOR
PIVOT BOLT
FUEL FEED HOSE
NUT
BOLTS
WASHERS
COLLARS
FUEL TANK
NUT
2P (Blue or Green) CONNECTOR
STOPPER CABLE
BREATHER
HOSE
DRAIN HOSE
16 N·m
(1.6 kgf·m, 12 lbf·ft)
WASHERS
COLLARS
Tighten the nut to
fuel tank slot upper
side securely as
shown.
TORQUE: 16 N·m(1.6kgf·m, 12 lbf·ft)
FUEL TANK
PIVOT BOLT/NUT/WASHERS/COLLARS
SLOT
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk
To Next Page
