FUEL SYSTEM (PGM-FI)
5-62
Relieve the fuel pressure and disconnect the quick
connect fitting from the fuel tank (page 5-51).
Remove the screw and right front resonator.
Remove the ECM stay screw.
Remove the screws, right air cleaner duct and reso-
nator from the air cleaner housing.
Release the IDC solenoid valve vacuum hose from
the ECM.
Disconnect the injector sub-harness 10P (Black) and
10P (White) connectors, and O
2 sensor 4P (Black)
connector.
Remove the screw and ECM stay.
Pull out the ECM from the air cleaner housing.
SCREWS
DUCT
RESONATOR
STAY SCREW
10P (White)
CONNECTOR
10P (Black)
CONNECTOR
4P (Black)
CONNECTOR
STAY
VACUUM
HOSE
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk
To Next Page
