FUEL SYSTEM (PGM-FI)
5-88
Apply small amount of engine oil to new seal rings
and O-rings.
Install the seal ring and O-ring to each injector.
Install the injectors to the fuel rail.
Apply oil to new O-rings and install them to the
IACV joints.
Install the IACV joints to the throttle body.
Install the joint plate and tighten the torx screw to
the specified torque.
TORQUE: 2.1 N·m(0.2kgf·m, 1.5 lbf·ft)
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk
To Next Page
