GENERAL INFORMATION
1-19
HYDRAULIC BRAKE
ABS (Anti-lock Brake System): CBF600SA/NA
LIGHTS/METERS/SWITCHES
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Brake hose oil bolt
CBF600SA/NA: 6 10 34 (3.5, 25)
CBF600S/N: 5 10 34 (3.5, 25)
Front brake caliper mounting bolt 4 8 30 (3.1, 22) ALOC bolt; replace with a new
one.
Caliper bleed valve
CBF600SA/NA: 4 8 5.4 (0.6, 4.0)
CBF600S/N: 3 8 5.4 (0.6, 4.0)
Brake pad pin 3 10 17 (1.7, 13)
Pad pin plug (CBF600S/N) 2 10 2.5 (0.3, 1.8)
Rear brake caliper bolt
(CBF600SA/NA)
1 8 22 (2.2, 16) ALOC bolt; replace with a new
one.
Front master cylinder holder bolt 2 6 12 (1.2, 9)
Front master cylinder reservoir
cap screw
2 4 1.5 (0.2, 1.1)
Brake lever pivot bolt 1 6 1.0 (0.1, 0.7) Apply silicone grease to the
sliding surface.
Brake lever pivot nut 1 6 5.9 (0.6, 4.4)
Front brake light switch screw 1 4 1.2 (0.1, 0.9)
Rear master cylinder mounting
bolt
2 6 12 (1.2, 9)
Rear master cylinder reservoir
hose joint screw
1 4 1.5 (0.2, 1.1) Apply a locking agent to the
threads.
Rear master cylinder push rod
joint nut
1 8 17 (1.7, 13)
Rear brake fluid reservoir mount-
ing bolt
1 6 10 (1.0, 7)
Front brake hose clamp bolt
CBF600SA/NA: 4 6 10 (1.0, 7)
CBF600S/N: 1 6 12 (1.2, 9) ALOC bolt; replace with a new
one.
Front brake hose stay mounting
bolt
1 6 12 (1.2, 9)
Rear brake hose guide screw 2 5 4.2 (0.4, 3.1)
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Brake pipe joint nut 14 10 14 (1.4, 10) Apply brake fluid to the
threads.
PCV mounting bolt 2 6 12 (1.2, 9)
Delay valve mounting bolt 2 6 12 (1.2, 9)
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Ignition switch mounting bolt 2 8 25 (2.5, 18) One-way bolt
License light mounting nut 2 5 1.7 (0.2, 1.3)
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk
To Next Page
