COOLING SYSTEM
6-22
Install the joint pipe to the water pump cover and
tighten the bolt securely.
Connect the bypass hose, then tighten the hose
band screw (page 6-22).
Connect the lower, upper radiator hose.
Tighten the hose band screws as shown.
Install the crankcase rear cover (page 7-17).
Fill the system with recommended coolant and
bleed the air (page 6-7).
Start the engine and check for coolant leaks.
OIL COOLER WATER HOSE
LOWER RADIATOR HOSE
BAND SCREWS
0 – 1 mm (0 – 0.04 in)
LOWER RADIATOR
HOSE
BAND SCREWS
UPPER RADIATOR
HOSE
0 – 1mm (0 – 0.04 in)
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk
To Next Page
