CYLINDER HEAD/VALVES
8-25
Apply a locking agent to the cam chain tensioner
pivot bolt threads.
Install the collar, cam chain tensioner A and bolt.
Tighten the cam chain guide A bolt to the specified
torque.
Tighten the cam chain tensioner A pivot bolt to the
specified torque.
Install the following:
– starter clutch (page 9-21)
– right crankcase cover (page 9-25)
Install the dowel pins and a new cylinder head gas-
ket as shown.
Install the cylinder head onto the cylinder block
while aligning the cam chain tensioner A and B as
shown.
COLLAR
CAM CHAIN TENSIONER A
BOLT
TORQUE: 12 N·m(1.2kgf·m, 9 lbf·ft)
TORQUE: 12 N·m(1.2kgf·m, 9 lbf·ft)
CAM CHAIN TENSIONER A
CAM CHAIN GUIDE A
BOLT/WASHER
BOLT/COLLAR
CYLINDER HEAD
CAM CHAIN
TENSIONER A
CAM CHAIN TENSIONER B
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk
To Next Page
