CYLINDER HEAD/VALVES
8-32
Install the cylinder head cover onto the cylinder
head.
Install the washers to the cylinder head cover with
their "UP" mark facing up.
Install and tighten the cylinder head cover bolts to
the specified torque.
Connect the crankcase breather hose to the cylinder
head cover.
Route the hoses,
wires properly
(page 1-24).
Connect the PAIR air suction hoses to the cylinder
head cover.
Connect the spark plug caps securely.
Install the fuel tank (page 5-60).
TORQUE: 10 N·m(1.0kgf·m, 7 lbf·ft)
BOLTS/
WASHERS
BREATHER HOSE
PAIR AIR SUCTION HOSES
SPARK PLUG CAPS
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk
To Next Page
