CLUTCH/STARTER CLUTCH/GEARSHIFT LINKAGE
9-18
Remove the thrust washer.
INSPECTION
Check the operation of the one-way clutch by turn-
ing the driven gear.
You should be able to turn the driven gear clock-
wise smoothly, but the gear should not turn coun-
terclockwise.
DISASSEMBLY
Remove the starter driven gear by turning it clock-
wise.
Remove the needle bearing.
Remove the snap ring and one-way clutch.
STARTER DRIVEN GEAR
NEEDLE BEARING
STARTER DRIVEN GEAR
NEEDLE BEARING
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk
To Next Page
