Honda CBF600SA - Page 441

HYDRAULIC BRAKE
15-5
TORQUE VALUES
TOOL
Front brake master cylinder holder bolt 12 N·m (1.2 kgf·m, 9 lbf·ft)
Front brake master cylinder reservoir
cap screw
1.5 N·m (0.2 kgf·m, 1.1 lbf·ft)
Brake lever pivot bolt 1.0 N·m (0.10 kgf·m, 0.7 lbf·ft) Apply brake grease to the pivot surface
Brake lever pivot nut 5.9 N·m (0.60 kgf·m, 4.4 lbf·ft)
Front brake light switch screw 1.2 N·m (0.12 kgf·m, 0.9 lbf·ft)
Front brake caliper mounting bolt 30 N·m (3.1 kgf·m, 22 lbf·ft) ALOC bolt; replace with a new one
Front brake caliper main slide pin 22 N·m (2.2 kgf·m, 16 lbf·ft) Apply a locking agent to the threads
Front brake caliper sub slide pin 12 N·m (1.2 kgf·m, 9 lbf·ft) Apply a locking agent to the threads
Pad pin 17 N·m (1.7 kgf·m, 13 lbf·ft)
Pad pin plug 2.5 N·m (0.25 kgf·m, 1.8 lbf·ft)
Front brake hose clamp bolt 12 N·m (1.2 kgf·m, 9 lbf·ft) ALOC bolt; replace with a new one
Brake caliper bleeder 5.4 N·m (0.6 kgf·m, 4.0 lbf·ft)
Rear master cylinder reservoir mount-
ing bolt
10 N·m (1.0 kgf·m, 7 lbf·ft)
Rear master cylinder mounting bolt 12 N·m (1.2 kgf·m, 9 lbf·ft)
Rear master cylinder hose joint screw 1.5 N·m (0.2 kgf·m, 1.1 lbf·ft) Apply a locking agent to the threads
Rear master cylinder push rod nut 17 N·m (1.7 kgf·m, 13 lbf·ft)
Rear brake caliper main slide pin 27 N·m (2.8 kgf·m, 20 lbf·ft)
Rear brake caliper sub slide pin 22 N·m (2.2 kgf·m, 16 lbf·ft) ALOC bolt; replace with a new one
Rear brake hose guide bolt 4.2 N·m (0.4 kgf·m, 3.1 lbf·ft)
Brake hose oil bolt 34 N·m (3.5 kgf·m, 25 lbf·ft)
Footpeg holder bolt 37 N·m (3.8 kgf·m, 27 lbf·ft)
Snap ring pliers
07914-SA50001
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk