MAINTENANCE
3-15
Fill the recommended engine oil up to the upper
level line.
Reinstall the oil filler cap.
ENGINE OIL & FILTER CHANGE
Change the oil with
the engine warm
and the motorcycle
on level ground to
assure complete
draining
Start the engine and let it idle for 3 – 5 minutes.
Stop the engine and wait 2 – 3 minutes.
Stop the engine and remove the oil filler cap.
Remove the drain bolt and sealing washer, then
drain the oil completely.
Remove and discard the oil filter cartridge using the
special tool.
Other viscosities
shown in the chart
may be used when
the average
temperature in your
riding area is within
the indicated range.
SUGGESTED OIL:
Honda "4-stroke motorcycle oil" or an equivalent
OIL RECOMMENDATION:
API classification: SG or higher (except oils labeled
energy conserving on the circular API service
label)
Viscosity: SAE 10W-30
JASO T 903 standard: MA
OIL DRAIN BOLT/SEALING WASHER
TOOL:
Oil filter wrench 07HAA-PJ70101
OIL FILTER WRENCH
OIL FILTER CARTRIDGE
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk
To Next Page
Loading...
