Level 2 ID
Nr
L2 main
menu
categories
L2 main menu
as displayed on
LCD
L2 submenu
as displayed
on LCD
Item code Description
L2.10 SHUTDOWN
Special mode to take the unit
out of service – i.e. to put in long term storage
(shelf
mode) Limited functionality is enabled in this mode
–just time update. No volume or measurements are
performed. HMI is active.
L2.11 BATT CHNG
Enter this mode when replacing the battery –
includes resetting battery gauge.
L2.12 RESET BATT
Allows resetting the battery
gauge (assumes installing a new battery).
L2.13
RESET
COMMS
Resets Serial Comms – generally should not be
needed.
L2.14
MODEM
CALLS
ALARM CALL
Allows user to force an Alarm
Call in to occur – assuming proper configurations
L2.15 SCHED CALL
Allows user to force a Scheduled Call in to occur –
assuming proper configurations
L2.16 STOP CALLS
Allows user to cancel both Alarm and Scheduled
Call retires – Note: does not disable Call-in
L2.17 BT PAIRING
BT PAIRING
L2.18 FORGET DEV
YES /NO
To Next Page
Loading...
