Honeywell EC350 - Page 147

Level 3 ID
Nr
L3 main menu
categories
L3 main menu
as displayed on
LCD
L3 submenu as
displayed on
LCD
Item code Description
L3.4.8.2 SUPER FACT
L3.4.8.3 PARAMETERS
L3.4.9 COM PROTCL
L3.4.10 PULSE OUT
L3.4.10.1 CH-A
L3.4.10.2 CH-B
L3.4.10.3 CH-C
L3.4.11 CloudLink
PULSE CNT
L3.5 ADV CONFIG Allows you to enter the item number. Press OK.
The following appears.
ENTER
ITEM NUMBR
Using the keypad, you can enter the required
item number. After you enter the item number,
the respective item appears on the display. You
can modify/set the value of the item. For
example, if you enter the item number 0000008,
GAS PRESS appears on the display.
L3.6 VERIFY P/T Allows you to validate the accuracy of the
pressure or temperature measured by EC350.
L3.6.1 VALIDATE P Select VALIDATE P/VALIDATE T and press OK.
Use the keypad to enter or change the value of
pressure/ temperature that the EC350 must
measure. After you enter the value, press OK. The
EC350 calculates the % ERROR. %ERROR is the
difference between the pressure/temperature
value measured by EC350 and the value (the
entered value) that EC350 must measure.
L3.6.2 VALIDATE T
L3.7 CALIB P/T Allows you to calibrate the pressure and
temperature measured by EC350.
6 User Access
6.1 Getting started with the keypad
Honeywell 2024
138