6 User Access
6.3 îConnecting to EC350 via MasterLink Software Application R610
Honeywell 2024
173
3. When the Bootloader file is uploading, the below screen appears:
4. After successfully uploading of the Bootloader file, a success message appears as shown in below
screen:
Note: The firmware file for the Loader has the name 350LDRXXXX.bin.
Note: If only a limited chunk of packets have been released for the upgrade this 'Reset' button allows
you to commence the firmware upgrade from the starting point. When not clicked, the update will
resume from the point where it stopped.
To Next Page
Loading...
