Honeywell EC350 - Page 207

In EDIT Input window > Input Definition, enter the following critical parameters:
l
Input description
l
Input Interval
l
Enable the Billable option
l
Save Data (enable checkboxes to store the Interval, Time of Call, Daily Reading)
l
Daily Read Hour (specify the hour at which the Remote Unit performs a read on the selected
input. Type the hour, (0 to23), minute and second). Profile 1, Profile 2, Profile 3 and Profile 4:
To define four profiles for CA0 and CA1 Remote Units that enable you to set up more than
one Daily Readings, that is, define four profiles at which the Remote Unit performs a read on
the selected input. Type the Hour, Minute, and Second for each Profile. One Profile must
match the Daily Read Hour.
6 User Access
6.5 Working with PowerSpring
Honeywell 2024
198