Honeywell HH490 - Code 93; Code 93 On;Off; Code 93 Message Length; Code 93 Append

HH490 User Guide 91
Maximum Message Length
Code 93
< Default All Code 93 Settings >
Code 93 On/Off
* On
Off
Code 93 Message Length
Scan the barcodes below to change the message length. Refer to Message
Length Description (page 82) for additional information. Minimum and
Maximum lengths = 0-80. Minimum Default = 0, Maximum Default = 80.
Minimum Message Length
Maximum Message Length
Code 93 Append
This function allows the scanner to append the data from several Code 93
barcodes together before transmitting them to the host computer. When this
function is enabled, the scanner stores those Code 93 barcodes that start with a
space (excluding the start and stop symbols), and does not immediately transmit
the data. The scanner stores the data in the order in which the barcodes are read,