Honeywell HH490 - Ean;Jan-13; EAN;JAN-13 On;Off; Convert UPC-A to EAN-13; EAN;JAN-13 Check Digit

108 HH490 User Guide
* UPC-E1 Off
EAN/JAN-13
<Default All EAN/JAN Settings>
EAN/JAN-13 On/Off
* On
Off
Convert UPC-A to EAN-13
When UPC-A Converted to EAN-13 is selected, UPC-A barcodes are converted
to 13 digits EAN-13 codes by adding a zero to the front. When Do not Convert
UPC-A is selected, UPC-A codes are read as UPC-A.
UPC-A Converted to EAN-13
* Do not Convert UPC-A
EAN/JAN-13 Check Digit
This selection allows you to specify whether the check digit should be transmitted
at the end of the scanned data or not.
Default = On.