Honeywell HH490 User Manual

160 HH490 User Guide
Note: This feature should not be used during normal scanner operation.
On
* Off
Application Plug-Ins
* Plugin function off（default）
Enable EasyDL2.0
Enable EasyGS1
Enable EasyBCBP
EZConfig for Scanning Introduction
EZConfig for Scanning provides a wide range of PC-based programming
functions that can be performed on the scanner connected to your PC. EZConfig
for Scanning allows you to download upgrades to the scanner’s firmware, change
programmed parameters, and create and print programming barcodes. Using
EZConfig for Scanning, you can even save/open the programming parameters.
This saved file can be e-mailed or, if required, you can create a single barcode
that contains all the customized programming parameters and mail or fax that
barcode to any location. Users in other locations can scan the barcode to load in
the customized programming.

Honeywell HH490 Specifications

General

Duplex scanning	No
Maximum scan size	- mm
Optical scanning resolution	1280 x 800 DPI
Scanner type	Handheld scanner
Product color	White
Quantity per pack	1 pc(s)
Sensor type	-
Barcode reader	Yes
Daily duty cycle (max)	- pages
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Power supply type	DC
Optional connectivity	Serial (RS-232)

Weight and Dimensions

Depth	72.5 mm
Width	125 mm
Height	154 mm
Weight	130 g