Honeywell HH490 User Manual

24 HH490 User Guide
Trigger Click
To hear an audible click every time the scanner trigger is pressed, scan the
Trigger Click On barcode below. Scan the Trigger Click Off code if you don’t
wish to hear the click. (This feature has no effect on serial or automatic
triggering.)
Default = Trigger Click Off.
*Trigger Click Off
Trigger Click On
Good Read and Error Indicators
Beeper – Good Read
The beeper may be programmed On or Off in response to a good read. Turning
this option off only turns off the beeper response to a good read indication. All
error and menu beeps are still audible.
Default = Beeper - Good Read On.
Beeper - Good Read Off
* Beeper - Good Read On
Beeper Volume – Good Read
The beeper volume codes modify the volume of the beep the scanner emits on a
good read.
Low
Medium
* High
Off

Honeywell HH490 Specifications

General

Duplex scanning	No
Maximum scan size	- mm
Optical scanning resolution	1280 x 800 DPI
Scanner type	Handheld scanner
Product color	White
Quantity per pack	1 pc(s)
Sensor type	-
Barcode reader	Yes
Daily duty cycle (max)	- pages
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Power supply type	DC
Optional connectivity	Serial (RS-232)

Weight and Dimensions

Depth	72.5 mm
Width	125 mm
Height	154 mm
Weight	130 g