Honeywell HH490 User Manual

HH490 User Guide 97
neighboring symbols, and 4) the standard layout for barcodes on a blood product
label. Use the barcodes below to turn concatenation on or off.
Default =Off.
On
* Off
Code 128 Redundancy
If you are encountering errors when reading Code 128 barcodes, you may want to
adjust the redundancy count. Redundancy adjusts the number of times a
barcode is decoded before transmission, which may reduce the number of errors.
Note that the higher the redundancy count, the longer it will take to decode the
barcode. To adjust the redundancy, scan the Code 128 Redundancy barcode
below, then scan a redundancy count between 0 and 10 on the Programming
Chart, beginning on page 211. Then scan the Save barcode.
Default = 0.
Code 128 Redundancy
Code 128 Message Length
Scan the barcodes below to change the message length. Refer to Message
Length Description (page 82) for additional information. Minimum and
Maximum lengths = 0-80. Minimum Default = 0, Maximum Default = 80.
Minimum Message Length
Maximum Message Length

Honeywell HH490 Specifications

General

Duplex scanning	No
Maximum scan size	- mm
Optical scanning resolution	1280 x 800 DPI
Scanner type	Handheld scanner
Product color	White
Quantity per pack	1 pc(s)
Sensor type	-
Barcode reader	Yes
Daily duty cycle (max)	- pages
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Power supply type	DC
Optional connectivity	Serial (RS-232)

Weight and Dimensions

Depth	72.5 mm
Width	125 mm
Height	154 mm
Weight	130 g