Honeywell HH490 - Dotcode On;Off; Poor Quality Dotcodes; Dotcode Message Length

130 HH490 User Guide
DotCode On/Off
On
* Off
Poor Quality DotCodes
This setting improves the scanner’s ability to read damaged or badly printed
DotCodes.
Default = Poor Quality DotCodes Off.
Poor Quality DotCodes On
* Poor Quality DotCodes Off
DotCode Message Length
Scan the barcodes below to change the message length. Refer to Message
Length Description (page 82) for additional information. Minimum and
Maximum lengths = 1-2400. Minimum Default = 1, Maximum Default = 2400.
Minimum Message Length
Maximum Message Length