HH490 User Guide 113
EAN-13 Beginning with 977 Addenda Required
This setting programs the scanner to require a 2 digit addenda only on EAN-13
barcodes that begin with “977.” The following settings can be programmed:
Require 2 Digit Addenda: All EAN-13 barcodes that begin with “977” must have
a 2 digit addendum. The EAN-13 barcode with the 2 digit addendum is then
transmitted as a single, concatenated barcode. If a 2 digit addendum is not found
within the Addenda Timeout period, the EAN-13 barcode is discarded.
Don’t Require 2 Digit Addenda: If you have selected Require 2 Digit Addenda,
and you want to disable this feature, scan Don’t Require 2 Digit Addenda.
EAN-13 barcodes are transmitted, depending on the setting you are using for
EAN/JAN-13 Addenda Required.
Default = Don’t Require 2 Digit Addenda.
* Don’t Require 2 Digit Addenda
EAN-13 Beginning with 978 Addenda Required
These settings program the scanner to require a 5 digit addenda only on EAN-13
barcodes that begin with “978.” The following settings can be programmed:
Require 5 Digit Addenda: All EAN-13 barcodes that begin with “978” must have
a 5 digit addendum. The EAN-13 barcode with the 5 digit addendum is then
transmitted as a single, concatenated barcode. If a 5 digit addendum is not found
within the Addenda Timeout period, the EAN-13 barcode is discarded.
Don’t Require 5 Digit Addenda: If you have selected Require 5 Digit Addenda,
and you want to disable this feature, scan Don’t Require 5 Digit Addenda.
EAN-13 barcodes are transmitted, depending on the setting you are using for
EAN/JAN-13 Addenda Required.
Default = Don’t Require 5 Digit Addenda.
* Don’t Require 5 Digit Addenda
To Next Page
Loading...
