Honeywell HH490 - EAN;JAN-8 Check Digit; EAN;JAN-8 Addenda; EAN;JAN-8 Addenda Required

116 HH490 User Guide
Off
EAN/JAN-8 Check Digit
This selection allows you to specify whether or not the check digit should be
transmitted at the end of the scanned data.
Default = On.
* On
Off
EAN/JAN-8 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-8 data.
Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
* 2 Digit Addenda Off
5 Digit Addenda On
* 5 Digit Addenda Off
EAN/JAN-8 Addenda Required
When Required is scanned, the scanner will only read EAN/JAN-8 barcodes that
have addenda.
Default = Not Required.