HH490 User Guide 105
UPC-E0 On/Off
Most U.P.C. barcodes lead with the 0 number system. To read these codes, use
the UPC-E0 On selection. If you need to read codes that lead with the 1 number
system, use UPC-E1 (page 106).
Default
=
On.
UPC-E0 Expand
UPC-E Expand expands the UPC-E code to the 12 digit, UPC-A format.
Default = Off.
UPC-E0 Addenda Required
When Required is scanned, the scanner will only read UPC-E barcodes that have
addenda.
Default
=
Not Required.
To Next Page
Loading...
