Honeywell HH490 User Manual

56 HH490 User Guide
Suffix Selections
Add Suffix
Clear One Suffix
Clear All Suffixes
Function Code Transmit
By default, all ASCII control characters are transmitted with barcode data. These
non-printable characters are translated into predefined key strokes, or CTRL+X
functions (see ASCII Conversion Chart (Code Page 1252), beginning on page
203). If these key strokes interfere with your host’s software application, scan
Disable to keep these ASCII control characters from being transmitted.
Default =
Enable.
* Enable
Disable
Note: You can also use a custom data format (see Data Format beginning on page 59) to
translate these characters into a more meaningful output.
Intercharacter, Interfunction, and Intermessage Delays
Some terminals drop information (characters) if data comes through too quickly.
Intercharacter, interfunction, and intermessage delays slow the transmission of
data, increasing data integrity.

Honeywell HH490 Specifications

General

Duplex scanning	No
Maximum scan size	- mm
Optical scanning resolution	1280 x 800 DPI
Scanner type	Handheld scanner
Product color	White
Quantity per pack	1 pc(s)
Sensor type	-
Barcode reader	Yes
Daily duty cycle (max)	- pages
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Power supply type	DC
Optional connectivity	Serial (RS-232)

Weight and Dimensions

Depth	72.5 mm
Width	125 mm
Height	154 mm
Weight	130 g