92 HH490 User Guide
deleting the first space from each. The scanner transmits the appended data
when it reads a Code 93 barcode that starts with a character other than a space.
Default = Off.
Code 93 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see ISO 2022/ISO
646 Character Replacements on page 208), and scan the value and the Save
barcode from the Programming Chart, beginning on page 211. The data
characters should then appear properly.
Straight 2 of 5 Industrial (three-bar start/stop)
<Default All Straight 2 of 5 Industrial Settings>
Straight 2 of 5 Industrial On/Off
To Next Page
Loading...
