Honeywell HH490 User Manual

HH490 User Guide 7
USB HID
Scan the following code to program the scanner for USB HID Barcode scanners.
USB HID Barcode Scanner
USB Serial
If you are using a Microsoft® Windows® PC, you will need to download the latest
driver from the Honeywell website (www.honeywellaidc.com) and go to Get
Resources - Downloads - Software. The driver will use the next available COM
Port number. Apple® Macintosh computers recognize the scanner as a USB CDC
class device and automatically use a class driver.
After the driver is downloaded, scan the following code to program the scanner to
emulate a regular RS232-based COM Port.
USB Serial
No extra configuration (e.g., baud rate) is necessary.
Note: If you scan the USB Serial barcode either with an older Honeywell serial driver, or
no driver installed, you may no longer be able to scan barcodes. If this happens,
either uninstall the older driver versions and install the latest driver or delete the
specific device entry in Device Manager.
CTS/RTS Emulation
CTS/RTS Emulation On
* CTS/RTS Emulation Off

Honeywell HH490 Specifications

General

Duplex scanning	No
Maximum scan size	- mm
Optical scanning resolution	1280 x 800 DPI
Scanner type	Handheld scanner
Product color	White
Quantity per pack	1 pc(s)
Sensor type	-
Barcode reader	Yes
Daily duty cycle (max)	- pages
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Power supply type	DC
Optional connectivity	Serial (RS-232)

Weight and Dimensions

Depth	72.5 mm
Width	125 mm
Height	154 mm
Weight	130 g