Honeywell HH490 User Manual

HH490 User Guide 85
Code 39
< Default All Code 39 Settings >
Code 39 On/Off
* On
Off
If you are reading Code 39 barcodes, Codablock A should remain disabled. If you
are enabling Codablock A (see Codablock A on page 121)
, you should disable
Code 39.
Code 39 Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the barcode. You
may either transmit, or not transmit Start/Stop characters.
Default = Don’t
Transmit.
Transmit
* Don’t Transmit
Code 39 Check Character
No Check Character indicates that the scanner reads and transmits barcode
data with or without a check character.
When Check Character is set to Validate, but Don’t Transmit, the unit only reads
Code 39 barcodes printed with a check character but will not transmit the check
character with the scanned data.

Honeywell HH490 Specifications

General

Duplex scanning	No
Maximum scan size	- mm
Optical scanning resolution	1280 x 800 DPI
Scanner type	Handheld scanner
Product color	White
Quantity per pack	1 pc(s)
Sensor type	-
Barcode reader	Yes
Daily duty cycle (max)	- pages
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Power supply type	DC
Optional connectivity	Serial (RS-232)

Weight and Dimensions

Depth	72.5 mm
Width	125 mm
Height	154 mm
Weight	130 g