HH490 User Guide 73
Search backward for a non-matching character
E7 Search the input message backward for the first non-“xx” character from the
current cursor position, leaving the cursor pointing to the non-“xx” character.
Syntax = E7xx
where xx stands for the search character’s hex value for its ASCII
code. Refer to the ASCII Conversion Chart (Code Page 1252), beginning on page
203 for decimal, hex and character codes.
Miscellaneous Commands
Suppress characters
FB Suppress all occurrences of up to 15 different characters, starting at the current
cursor position, as the cursor is advanced by other commands. When the FC
command is encountered, the suppress function is terminated. The cursor is not
moved by the FB command.
Syntax = FBnnxxyy . .zz where nn is a count of the number of suppressed
characters in the list, and xxyy .. zz is the list of characters to be suppressed.
FB Example: Remove spaces in barcode data
This example shows a barcode that has spaces in the data. You may want to
remove the spaces before sending the data. Using the barcode above:
Command string: FB0120F10D
FB is the “Suppress characters” command
01 is the number of character types to be suppressed
20 is the hex value for a space
F1 is the “Send all characters” command
0D is the hex value for a CR
The data is output as:
34567890
<CR>
Stop suppressing characters
Disables suppress filter and clear all suppressed characters.
Syntax = FC.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
