Honeywell HH490 User Manual

8 HH490 User Guide
ACK/NAK Mode
ACK/NAK Mode On
* ACK/NAK Mode Off
Remote MasterMind™ for USB
When using a USB interface, you may wish to configure your scanner to
communicate with Remote MasterMind Scanner Management Software (ReM).
Scan the ReM On barcode to communicate with ReM. To disable this capability,
scan ReM Off.
Default = ReM On.
ReM Off
* ReM On
Keyboard Country Layout
If your interface is USB Keyboard or Keyboard Wedge, your keyboard layout
default is a US keyboard. To change this layout, scan the appropriate Keyboard
Country barcode below. By default, national character replacements are used for
the following characters: # $ @ [ \ ] ^ ‘ { | } ~. Refer to the
"ISO 2022/ISO 646
Character Replacements" on page A-207
to view the character replacements for
each country.
Keyboard Countries
* United States
Albania
Azeri (Cyrillic)
Azeri (Latin)

Honeywell HH490 Specifications

General

Duplex scanning	No
Maximum scan size	- mm
Optical scanning resolution	1280 x 800 DPI
Scanner type	Handheld scanner
Product color	White
Quantity per pack	1 pc(s)
Sensor type	-
Barcode reader	Yes
Daily duty cycle (max)	- pages
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Power supply type	DC
Optional connectivity	Serial (RS-232)

Weight and Dimensions

Depth	72.5 mm
Width	125 mm
Height	154 mm
Weight	130 g