HH490 User Guide 107
UPC-E0 Leading Zero
This feature allows the transmission of a leading zero (0) at the beginning of
scanned data. To prevent transmission, scan Off.
Default
=
On.
UPC-E0 Addenda
This selection adds 2 or 5 digits to the end of all scanned UPC-E data.
Default
=
Off for both 2 Digit and 5 Digit Addenda.
UPC-E1
Most U.P.C. barcodes lead with the 0 number system. For these codes, use
UPC-E0 (page 103). If you need to read codes that lead with the 1 number
system, use the UPC-E1 On selection.
Default
=
Off.
To Next Page
Loading...
