Honeywell HH490 User Manual

46 HH490 User Guide
0D
0A
carriage return
line feed
The whole command line would look like this:
SEQBLK62999943FF6A999954FF7299994DFF
;
SEQSEP993C3E;SEQSUF9
90D0A
The data is output as:
CODE39SMPL<>TSTMSGCODE128<>MSGPDF417
[ CR][ LF]
Enter Output Sequence
If you are using barcodes to create your output sequence, scan Enter Output
Sequence to begin scanning your string.
Enter Output Sequence
Partial Sequence
If an output sequence operation is terminated before all your output sequence
criteria are met, the barcode data acquired to that point is a “partial sequence.”
You can define how partial sequences are output using the same types of
command strings you used to create output sequences.
Partial Sequence Example - Three Symbologies with <> Separators, but with a
Damaged Code
In this example, you are scanning PDF417, Code 128, and Code 39 barcodes, and
you want the scanner to output Code 39 first, Code 128 second, and PDF417
third, in brackets, as shown below, but the Code 39 barcode has been damaged
and cannot be output.

Honeywell HH490 Specifications

General

Duplex scanning	No
Maximum scan size	- mm
Optical scanning resolution	1280 x 800 DPI
Scanner type	Handheld scanner
Product color	White
Quantity per pack	1 pc(s)
Sensor type	-
Barcode reader	Yes
Daily duty cycle (max)	- pages
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Power supply type	DC
Optional connectivity	Serial (RS-232)

Weight and Dimensions

Depth	72.5 mm
Width	125 mm
Height	154 mm
Weight	130 g