Honeywell HH490 User Manual

HH490 User Guide 159
CHAPTER 8 - UTILITIES
Add a Test Code I.D. Prefix to All Symbologies
This selection allows you to turn on transmission of a Code I.D. before the
decoded symbology. (See the Symbology Charts, beginning on page 200 for the
single character code that identifies each symbology.) This action first clears all
current prefixes, then programs a Code I.D. prefix for all symbologies. This is a
temporary setting that will be removed when the unit is power cycled.
Add Code I.D. Prefix to All Symbologies (Temporary)
Show Software Revision
Scan the barcode below to output the current software revision, unit serial
number, and other product information for both the scanner.
Show Boot Software Revision
Show App Software Revision
Test Menu
When you scan the Test Menu On code, then scan a programming code in this
manual, the scanner displays the content of a programming code. The
programming function will still occur, but in addition, the content of that
programming code is output to the terminal.
8
CHAPTER

Honeywell HH490 Specifications

General

Duplex scanning	No
Maximum scan size	- mm
Optical scanning resolution	1280 x 800 DPI
Scanner type	Handheld scanner
Product color	White
Quantity per pack	1 pc(s)
Sensor type	-
Barcode reader	Yes
Daily duty cycle (max)	- pages
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Power supply type	DC
Optional connectivity	Serial (RS-232)

Weight and Dimensions

Depth	72.5 mm
Width	125 mm
Height	154 mm
Weight	130 g