Honeywell HH490 User Manual

HH490 User Guide 93
Straight 2 of 5 Industrial Message Length
Scan the barcodes below to change the message length. Refer to Message
Length Description (page 82) for additional information. Minimum and
Maximum lengths = 1-48. Minimum Default = 4, Maximum Default = 48.
Minimum Message Length
Maximum Message Length
Straight 2 of 5 IATA (two-bar start/stop)
<Default All Straight 2 of 5 IATA Settings>
Straight 2 of 5 IATA On/Off
On
* Off
Straight 2 of 5 IATA Redundancy
If you are encountering errors when reading Straight 2 of 5 IATA barcodes, you
may want to adjust the redundancy count. Redundancy adjusts the number of
times a barcode is decoded before transmission, which may reduce the number
of errors. Note that the higher the redundancy count, the longer it will take to
decode the barcode. To adjust the redundancy, scan the Straight 2 of 5 IATA
Redundancy barcode below, then scan a redundancy count between 0 and 10 on
the Programming Chart, beginning on page 211. Then scan the Save barcode.
Default = 0.

Honeywell HH490 Specifications

General

Duplex scanning	No
Maximum scan size	- mm
Optical scanning resolution	1280 x 800 DPI
Scanner type	Handheld scanner
Product color	White
Quantity per pack	1 pc(s)
Sensor type	-
Barcode reader	Yes
Daily duty cycle (max)	- pages
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Power supply type	DC
Optional connectivity	Serial (RS-232)

Weight and Dimensions

Depth	72.5 mm
Width	125 mm
Height	154 mm
Weight	130 g