Honeywell HH490 User Manual

58 HH490 User Guide
Interfunction Delay
An interfunction delay of up to 5000 milliseconds (in 5ms increments) may be
placed between the transmission of each control character in the message string.
Scan the Interfunction Delay barcode below, then scan the number of 5ms
delays, and the Save barcode from the Programming Chart, beginning on page
211.
Interfunction Delay
To remove this delay, scan the Interfunction Delay barcode, then set the number
of delays to 0. Scan the Save barcode from the Programming Chart, beginning on
page 211.
Intermessage Delay
An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be
placed between each scan transmission. Scan the Intermessage Delay barcode
below, then scan the number of 5ms delays, and the Save barcode from the
Programming Chart, beginning on page 211.
Intermessage Delay
To remove this delay, scan the Intermessage Delay barcode, then set the number
of delays to 0. Scan the Save barcode from the Programming Chart, beginning on
page 211.
Prefix
Scanned Data
Suffix
STX
1
HT
3
4
5
CR
Interfunction Delays
2
LF
1st Scan Transmission
2nd Scan Transmission
Intermessage Delay

Honeywell HH490 Specifications

General

Duplex scanning	No
Maximum scan size	- mm
Optical scanning resolution	1280 x 800 DPI
Scanner type	Handheld scanner
Product color	White
Quantity per pack	1 pc(s)
Sensor type	-
Barcode reader	Yes
Daily duty cycle (max)	- pages
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Power supply type	DC
Optional connectivity	Serial (RS-232)

Weight and Dimensions

Depth	72.5 mm
Width	125 mm
Height	154 mm
Weight	130 g