Honeywell HH490 - Step 1 - Take a Picture Using IMGSNP; Image Snap - IMGSNP; IMGSNP Modifiers

132 HH490 User Guide
Uses ID Decoder then Both
Decoders
Uses Digimarc Decoder then Both
Decoders
Uses ID Decoder then Alternates
Decoders
Uses Digimarc Decoder then
Alternates Decoders
Data Matrix
< Default All Data Matrix Settings >
Data Matrix On/Off
* On
Off
Direct Part Marking Decoding
If you are having trouble reading Direct Part Marking (DPM) barcodes, scan
Dotpeen DPM Decoding for Dotpeen codes or scan Reflective (Etched) DPM
Decoding for reflective (etched) codes
. Default = Disable DPM Decoding.