EasyManuals Logo

Honeywell HH490 User Manual

Honeywell HH490
228 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #124 background imageLoading...
Page #124 background image
110 HH490 User Guide
EAN-13 Beginning with 290 Addenda Required
This setting programs the scanner to require a 5 digits addenda only on EAN-13
barcodes that begin with “290.” The following settings can be programmed:
Require 5 Digit Addenda: All EAN-13 barcodes that begin with “290” must have
a 5 digits addendum. The EAN-13 barcode with the 5 digits addendum is then
transmitted as a single, concatenated barcode. If a 5 digit addendum is not found
within the Addenda Timeout period, the EAN-13 barcode is discarded.
Note:
If you are using EAN-13 Beginning with 290 Addenda Required (page 109), this
setting will take precedence.
Don’t Require 5 Digit Addenda: If you have selected Require 5 Digit Addenda,
and you want to disable this feature, scan Don’t Require 5 Digit Addenda.
EAN-13 barcodes are transmitted, depending on the setting you are using for
EAN/JAN-13 Addenda Required.
Default = Don’t Require 5 Digit Addenda.
* Don’t Require 5 Digit Addenda
Require 5 Digit Addenda
EAN-13 Beginning with 378/379 Addenda Required
This setting programs the scanner to require any combination of a 2 digit
addenda or a 5 digit addenda on EAN-13 barcodes that begin with a “378” or
“379.” The following settings can be programmed:
Require Addenda: All EAN-13 barcodes that begin with a “378” or “379” must
have a 2 digit addenda, a 5 digit addenda, or a combination of these addenda.
The EAN- 13 barcode with the addenda is then transmitted as a single,
concatenated barcode. If the required addenda is not found within the Addenda
Timeout period, the EAN-13 barcode is discarded.
Don’t Require Addenda: If you have selected Require Addenda, and you want to
disable this feature, scan Don’t Require Addenda. EAN-13 barcodes are
transmitted, depending on the setting you are using for EAN/JAN-13 Addenda
Required.

Table of Contents

Other manuals for Honeywell HH490

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell HH490 and is the answer not in the manual?

Honeywell HH490 Specifications

General IconGeneral
Duplex scanningNo
Maximum scan size- mm
Optical scanning resolution1280 x 800 DPI
Scanner typeHandheld scanner
Product colorWhite
Quantity per pack1 pc(s)
Sensor type-
Barcode readerYes
Daily duty cycle (max)- pages
Storage temperature (T-T)-40 - 60 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)0 - 95 %
Power supply typeDC
Optional connectivitySerial (RS-232)
Weight and Dimensions IconWeight and Dimensions
Depth72.5 mm
Width125 mm
Height154 mm
Weight130 g

Related product manuals